JX-200P HDPE pre-applied self-adhered waterproofing membrane
Product Overview
JX-200 HDPE pre-laid polymer self-adhesive waterproofing membrane is a polymer pre-laid waterproofing membrane with HDPE (high-density polyethylene) sheet as the base film, and a single-sided polymer self-adhesive film layer and an anti-sticking particle protective layer.
The post-poured concrete undergoes a cross-linking reaction with the self-adhesive film layer in the membrane, and at the same time physical adsorption and mortise and tenon effects occur during the cement curing process, which causes the membrane to firmly bond with the post-poured concrete, forming a fully sticky waterproof layer on the surface of the concrete structure, thereby blocking water seepage channels and improving the quality of building waterproofing.
Features
Excellent mechanical properties. The roll sheet is made of HDPE (high-density polyethylene), which is characterized by high tensile strength at break and tear strength. The film has good water resistance. It can meet the waterproof requirements of the first and second level waterproof projects when used in a single layer.
Good bonding performance, using the pre-laid reverse bonding method to form a fully bonded waterproof structure with the main body of the concrete structure, eliminating the hidden danger of water leakage.
Shorten the construction period, use the empty paving method, and it will not be affected by the damp base surface, which has obvious advantages in rainy season construction.
Reverse bonding, no need for waterproof protective layer, people can directly tie steel bars and pour concrete.
It has excellent impact resistance and puncture resistance, and can withstand the impact of construction loads and steel skeletons directly acting on it.
Acid, alkali and salt resistant, and chloride ion resistant. The performance of the coil is hardly affected in general saline-alkali land or acid rain areas.
Green and environmentally friendly, it uses white virgin materials (granules) as raw materials. The sheets are pure white and can be recycled.
Specification
Width(m)
Width(m) | Thickness (mm) | Length (m) | Area (m2/roll) |
1m, 2m optional | 1.2mm,1.5mm optional | 20m | 20m2,40m2 optional |
Note: Standard product thickness is 1.2mm, 1.5mm, 1.7mm . Other thickness and width can be customized according to project needs; the area is related to the length and width of the coil.
Performance Index
China's implementation standard
GB/T23457-2017 Pre-laid waterproofing membrane Category P
No. | Test items | Technical indicators | |
1 | Tensile properties | Tensile force | ≥ 600 N/50mm |
Film elongation at break | ≥ 400% | ||
2 | Nail rod tearing strength | ≥ 400N | |
3 | Puncture resistance | ≥ 350N | |
4 | Impact resistance (0.5kg?m) | No leakage | |
5 | Static load resistance | 20KG, no leakage | |
6 | Heat resistance | 80℃, 2h without slipping, flowing or dripping | |
7 | Low temperature flexure | Main material -35℃, no cracks | |
8 | Low temperature flexibility | Adhesive layer -25℃, no cracks | |
9 | Oil permeability | 1 | |
10 | Water penetration resistance | 0.8MPa/35mm, no water leakage for 4h | |
11 | Waterproofness (0.3MPa, 120min) | impermeable | |
12 | Stripping from post-cast concrete Strength, N/mm | No treatment | ≥1.5 |
Water treatment | ≥1.0 | ||
Sediment pollution surface | ≥1.0 | ||
UV treatment | ≥1.0 | ||
Heat Treatment | ≥1.0 | ||
13 | Peel strength after immersion in water with post-cast concrete | ≥1.0 N/mm | |
14 | Coil to coil peel strength (Overlap edge) a , N/mm | No treatment | ≥0.8 |
Water treatment | ≥0.8 | ||
15 | Peel strength of anti-adhesive treated part of coil b | ≤0.1N/mm or non-stick | |
16 | Heat aging (80℃, 168h) | Tensile force retention rate | ≥90% |
Elongation retention rate | ≥80% | ||
Low temperature bendability | Main material -32℃, no cracks | ||
Low temperature flexibility | Adhesive layer -23℃, no cracks | ||
17 | Dimensional change rate, % | ±1.5 | |
a. It is suitable for products with self-adhesive overlap on the longitudinal long side of the coil. b, The particle surface product can be directly represented as non-bonded. | |||
It is mainly used for basement floors and side walls.
![官方抖音 掃碼關(guān)注](javascript:Site.hoverQrCode("//27096976.s21i.faiusr.com/4/ABUIABAEGAAgtZHUhAYotM3BtgIwjwQ4jgQ.png",this,{"tips":"Scan QRcode"});){kind=link}
![公眾號(hào) 掃碼關(guān)注](javascript:Site.hoverQrCode("//27096976.s21i.faiusr.com/2/ABUIABACGAAg3o7UhAYo8L6q9gEwgAo4gAo.jpg",this,{"tips":"Scan QRcode"});){kind=link}